Ricoh G035 Service Manual page 196

FTPDL Utility (for TCP/IP Networks)
System Requirements
• Windows 3.1x/95/98, Windows NT4.0
• TCP/IP protocol installed
Network Requirements
• The target network interface board (NIB) must have a valid IP address.
NOTE: If NIB is in the "DOWN" status, this utility cannot be used because no
IP address is assigned to the NIB. Use the "Flashup" utility instead.
Installation
1. Unzip ftpdl.ZIP to a temporary folder (directory). The following files should be
extracted there.
FTPDL.ZIP
_inst16.ex
_isdel
_Setup.1
_Setup.dll
_Setup.lib
Disk1.id
Readme
Setup
Setup
Setup
Setup.iss
Setup.pkg
1. Run "Setup.exe" from the folder (directory).
2. Click "Next >" in the "Welcome" dialog box.
3. Read the readme.txt file displayed in the "Readme Information" dialog box, then
click "Next >".
4. In the "Destination Location" dialog box, choose a folder (directory) to install the
software, then click "Next >".
5. Confirm the program folder (group) name, then click "Next >".
6. After the software has been installed, click "Finish" in the "Setup Complete"
dialog box.
G035
274KB EX_File
8KB Application
783KB 1 File
6KB Application Extension
153KB LIB File
1KB ID File
2KB Text Document
44KB Application
1KB Configuration Settings
64KB Internet Communication
1KB ISS File
1KB PKG File
4-30
NETWORK INTERFACE BOARD
7/10/96 2:15 AM
9/7/95 8:22 PM
6/11/99 4:19 PM
4/29/96 8:25 AM
6/11/99 4:19 PM
6/11/99 4:19 PM
6/11/99 4:05 PM
7/24/96 4:00 AM
6/11/99 4:19 PM
7/31/96 12:50 PM
6/11/99 4:18 PM
6/11/99 4:19 PM
SM