Ricoh G035 Service Manual page 176

Rev. 03/2000
Menu
Menu Menu
Level 2 Level 3
17
⇒
18
19 1 ~ 9
20 1 ~ 99
21
1
22
2
G035
Auto Off Mode Selects energy saver mode off. Press
! or " key to select "No" or "Yes".
Disabling
In the default setting, the 0 minute
option of the energy saver timer range
will appear on the LCD in the user
menu, and the user can disable the
energy saver mode. (In the user
menu, the user will be able to select 0
minutes.)
Memory All Resets the correction data for process
Clear control and software counters.
Also, returns all modes and
adjustments to the default settings.
Exceptions:
• Electrical
See the "Memory All Clear" section for
how to use this SP mode correctly.
total counter
• PM Counter Press ""Enter #" twice, then turn the
main power switch off and on.
• Serial
Normally, this SP mode should not
Number
be used.
• P&P brand
It is used only after replacing the
name and
NVRAM, or when the copier
Prod. Name
malfunctions due to a damaged
setting
NVRAM.
Input Check Displays the signals received from
sensors and switches.
See the "Input Check" section for
details.
Output Check Turns on the electrical components
individually for test purposes.
See the "Output Check" section for
details.
Plug & Play Selects the brand name and the
Brand Name production name for Windows 95 Plug
and & Play. This information is stored in
Production the NVRAM. If the NVRAM is
Name Setting defective, these names should be
registered again.
After selecting, press the "Enter #"
key. If the setting is completed, a "#"
mark will be displayed before the
selection.
SMC Printing - Prints all the system parameter lists.
All Data See the "System Parameter and Data
Lists" section for how to print the lists.
SMC Printing - Prints the SP mode data list.
SP Mode Data See the "System Parameter and Data
Lists" section for how to print the lists.
Function
4-12
SERVICE PROGRAM MODE
Settings
[Default]
No or Yes
[No]
Execute
Execute
SM