Installation Procedure; Dram Simm - Ricoh G035 Service Manual

DRAM SIMM

⇒
3.11 DRAM SIMM
3.11.1 REQUIRED SPECIFICATION CHECK
Before installing the DRAM SIMM, check that it satisfies the requirements below.
Number of pins
Access speed
Capacity
Parity

3.11.2 INSTALLATION PROCEDURE

A850I506.WMF
!
CAUTION
Unplug the copier power cord before starting the following procedure.
NOTE: When the DRAM SIMM and the printer controller (A850) are installed at the
same time, skip steps 1 and 2.
1. Remove the printer controller. (See Covers.)
2. Remove the printer controller assembly [A] (2 screws).
3. Remove the optional hard disk unit [B] (4 screws, 1 connector).
4. Install the DRAM SIMM [C], as shown.
NOTE: Make sure that the DRAM SIMM is installed properly.
5. Reinstall the printer controller in the main machine.
G035
Type
72 pins
60 ns or faster
8, 16, or 32 MB
Any OK
[A]
PC Compatible
[C]
A850I503.WMF
3-44
Rev. 08/2000
[B]
[D]
A850R502.WMF
SM