Ricoh G035 Service Manual page 160

PUNCH UNIT INSTALLATION
[A]
G035I510.WMF
4. Install the spacer [A] (thickness = 2 mm).
NOTE: There are three spacers in the accessory box. Do not lose the other
two spacers (1-mm) because they are used for adjusting the punch
hole position.
5. Install the punch unit [B] and secure it with a long stepped screw [C].
6. Install the punch unit knob [D] (1 screw).
7. Secure the rear of the punch unit (2 screws).
G035
[B]
3-42
[D]
[C]
G035I765.WMF
SM