Ricoh G035 Service Manual page 193

Flashup Utility (for Novell IPX Networks)
System Requirements
• Windows 3.1x/95/98, Windows NT3.5x/4.0
• Novell compatible IPX protocol installed
• Novell compatible NetWare client software installed
Network Requirements
• NetWare 2.x/3.x/4.x server running in Bindery mode
Installation Procedure
1. Unzip Flashup.ZIP to a temporary folder (directory). The following files should
be extracted there.
FLASHUP.ZIP
_inst16.ex_
_isdel
_setup.1
_setup.dll
_setup.lib
Disk1.id
Readme
Setup
Setup
Setup
Setup.iss
Setup.pkg
1. Run "Setup.exe" from the folder (directory).
2. Click "Next >" in the "Welcome" dialog box.
3. Read the readme.txt file displayed in the "Readme Information" dialog box, then
click "Next >".
4. In the "Destination Location" dialog box, choose a folder (directory) to install the
software, then click "Next >".
5. Confirm the program folder (group) name, then click "Next >".
6. After the software has been installed, click "Finish" in the "Setup Complete"
dialog box.
SM
274KB EX_File
8KB Application
233KB 1 File
6KB Application Extension
153KB LIB File
1KB ID File
1KB Text Document
44KB Application
1KB Configuration Settings
64KB Internet Communication
1KB ISS File
1KB PKG File
4-27
NETWORK INTERFACE BOARD
7/10/96 2:15 AM
9/7/95 8:22 PM
11/10/98 1:46 PM
4/29/96 8:25 AM
11/10/98 1:45 PM
11/10/98 1:46 PM
11/6/98 8:54 AM
7/24/96 4:00 AM
7/31/96 12:50 PM
7/31/96 12:50 PM
11/10/98 1:45 PM
11/10/98 1:45 PM
G035