Ricoh G035 Service Manual page 285

SC722: Finisher Jogger Motor Error
Definition [B]
1) The finisher jogger H.P sensor remains de-activated for more than a certain
time when returning to home position.
2) The finisher jogger H.P sensor remains activated for more than a certain
time when moving away from home position.
Possible Causes
• Jogger H.P sensor defective
• Jogger motor defective
SC724: Finisher Staple Hammer Motor Error
Definition [B]
Stapling does not finish within a certain time after the staple hammer motor
turned on.
Possible Causes
• Staple hammer motor defective
• Staple jam
SC725: Finisher Stack Feed-out Motor Error
Definition [B]
The stack feed-out belt H.P sensor does not activate within a certain time after
the stack feed-out motor turned on.
Possible Causes
• Stack feed-out H.P sensor defective
• Stack feed-out motor defective
SC726: Finisher Shift/Lift Motor Error
Definition [B]
1) Tray shift does not finish within a certain time after the shift motor turned on.
2) The stack height sensor does not activate within a certain time after the shift
tray lift motor turned on.
Possible Causes
• Shift motor defective
• Shift tray lift motor defective
SM
SERVICE CALL CONDITIONS
7-15 G035