Ricoh G035 Service Manual page 131

Novell NetWare Network
Bindery Network
Use the NetWare Setup utility to set up everything for NetWare printing in a single
procedure.
Or, use PCONCOLE to setup printers, print queues, and print servers in the server
bindery, then use MAP (Management Access Program) to setup NetWare
parameters in the NIB.
NOTE: 1) The NetWare Setup utility requires Novell 32-bit client on Windows 9x or
NT. Also, supervisor privileges are required to perform complete setup.
2) The MAP utility requires the Microsoft IPX/SPX SPX compatible protocol
stack on Windows 9x or Windows NT4.0, and a Web browser (Microsoft
Internet Explorer 3.02 or later, or any version of Netscape Navigator ).
NDS Network
Use the NetWare Setup utility to set up everything for NetWare printing in a single
procedure.
Or, use PCONCOLE or NetWare Administrator to setup printers, print queues, and
print servers in the server bindery, then use MAP (Management Access Program)
to set up NetWare parameters in the NIB.
NOTE: The NIB does not support "Notification" function on NetWare NDS
networks.
TCP/IP Network
LPR/LPD Printing
The NIB supports standard lpd. If a Windows or UNIX workstation has an lpr
spooler, it can send print jobs to the NIB directly.
FTP Printing
The NIB can receive print jobs directly from an ftp client.
Using an Ftp Client
1. Login to the NIB as "port1" (ASCII/PCL) user name.
2. Put a file to print.
Using NetScape Navigator (Version 2.0 or Later)
1. Open one of the following addresses:
• ftp://port1@<IP Address> (ASCII/PCL)
2. Select [File] – [Upload] to put a print file.
SM
NETWORK INTERFACE BOARD (NIB) INSTALLATION
3-13 G035