Ricoh G035 Service Manual page 59

Punching
Punching is only available when the punch unit is installed with the 3,000-sheet
finisher. The number of holes depends on the type of punching unit. The punching
unit has only one available position, so the relationship between the punching
position and the printed image depends on the paper feeding orientation and
imaging. The punching positions are defined as follows.
1) Left
2) Top
3) Right
Jam Recovery
If the jam recovery feature is on and a paper jam occurs, the controller will reprint
all pages for which it did not receive a feed-out indication from the main machine.
In most cases, all image data from the controller is saved on the HDD in the main
machine. When a jam occurs, the recovery data is sent from the HDD in the main
machine to the controller and printing continues after the jam is removed.
Auto Tray Select
After selecting "Auto Select" using the printer driver, the printer searches for a tray
that contains the specified size of normal plain paper. The search starts from the
LCT, and after finding a tray that contains the specified size of paper, the printer
starts printing and feeds paper from that tray. The search sequence is as follows.
LCT – 1st tray – 2nd tray – 3rd tray – 4th tray – LCT
The default setting for the current tray is LCT. If the LCT is not installed, the default
is the 1st tray.
Power On Self Diagnostics
When the controller turns on, it automatically performs a self-diagnostic sequence
of tests. If any errors are detected, the operation panel displays an error message.
Test Items
Devices always tested
• Co-processor
• Flash ROM
• Resident RAM
• NVRAM
• Engine I/F
• Network interface board I/F
Devices tested when they are installed
• DRAM SIMM
• HDD I/F
SM 2-7
PRINTER CONTROLLER
G035