Managing Address Information; Configuring Energy Saver Mode - Ricoh Aficio 2045e General Settings Manual

Using SmartNetMonitor for Admin
Check Spool Printing Job List on
the Web browser, and print out.
Reference
For more information about
Spool Printing Job List, see
Spool Printing Job List Help.
Note
❒ To display Spool Printing Job
List, spool must be set to [Ena-
ble] on Device Settings in ad-
vance.
Managing Address
Information
A A A A
Start SmartNetMonitor for Admin.
B B B B
On the [Group] menu, point to
[Search Device], and then click
[TCP/IP] or [IPX/SPX].
A list of machines appears.
7
Note
❒ Select the protocol of the ma-
chine for which you want to
change configuration.
C C C C
In the list, select the machine for
which you want to change config-
uration.
D D D D
On the [Tools(T)] menu, click [Ad-
dress Management Tool].
The dialog box for entering the
password appears.
E E E E
Enter the password, and then
click [OK].
Note
❒ The factory default password is
"password".
Address Management Tool starts.
80
Reference
For more information about
Address Management Tool, see
Address Management Tool
Help.
Configuring Energy Saver
Mode
A A A A
Start SmartNetMonitor for Admin.
B B B B
On the [Group] menu, point to
[Search Device], and then click
[TCP/IP] or [IPX/SPX].
A list of machines appears.
C C C C
On the [Group] menu, point to [En-
ergy Saver Mode].
For more information about set-
tings, see SmartNetMonitor for
Admin Help.
Note
❒ Point to [Set by Group] if you
want to change all devices in the
area.
❒ Point to [Set Individually] if you
want to change only selected
devices.
❒ In both cases, select the Energy
Saver mode on the displayed
menu.
❒ When you point to [Set Individu-
ally], [Timer Settings] is not dis-
played.