Details Of Setting Data; Station No - Mitsubishi Electric MELSEC IQ-R series Reference Manual

6.2

Details of Setting Data

This section explains the content and specification method of the data items to set the access route.
: Necessary, : Unnecessary
Item

Station No.

Network No.
PC No.
Request destination module I/O No.
Request destination module station No.
Self-station No.
Station No.
Specify the station accessed from an external device.
Accessing the connected station (host station)
Specify '0' when accessing the connected station (host station).
External device
Accessing multidrop connection station
Specify the station No. of an access target station from '0' to '31' (00H to 1FH) when connecting with the multidrop connection.
External device
■When accessing all stations connected with the multidrop connection with the global function
Specify 'FF' (FFH) when turning ON/OFF the global signal to all station connected with the multidrop connection using the
global function. By specifying 0 to 31 (00H to 1FH), X1A/X1B turns ON only on the specified station, and does not turn ON on
the other stations.
(Page 255 Global Function)
External device
6 ACCESS ROUTE SETTINGS
50
6.2 Details of Setting Data
Frames for C24
4C 3C 2C 1C
   
   

   
   
Connected station
:Access target station
(Host station)
Multidrop connection
Multidrop connection
Frames for E71 Reference
4E 3E 1E
   Page 50 Station No.
  
Page 52 Network No., PC No.
  
  
Page 55 Request destination module I/O No., request
destination module station No.
   Page 59 Self-station No.
:Access target station
:Access target station