Mitsubishi Electric MELSEC IQ-R series Reference Manual page 329

Communication example (Batch write)
Batch write is executed under the following condition.
• Drive name: 1 (RAM area of memory card A)
• File No.: 1
• File name: ABC12.QPG
• Offset address: 7CH
• Number of bytes written: 416 bytes
■Data communication in ASCII code
(Request data)
Subcommand
File name
Address 7CH Address 7DH to 21AH
Write data (For 416 bytes)
■Data communication in binary code
(Request data)
Setting
flag
Subcommand Keyword
Extension Attribute Offset address
Keyword Setting flag
Extension Attribute
Address 21BH
File No.
Drive name File name
Number of bytes written Address 7DH to 21AH
Address 7CH
Write data (For 416 bytes)
Drive name File No.
Offset address Number of bytes written
Address 21BH
15 QnACPU DEDICATED COMMANDS
15
327
15.3 File Control