Modify File Creation Date And Time (Command: 1826) - Mitsubishi Electric MELSEC IQ-R series Reference Manual

Modify file creation date and time (command: 1826)

Modify the file creation date and time.
When this command is executed to files of parameter and a program being executed, place CPU module in
the STOP status. (Page 463 Commands that cannot be executed during RUN)
Message format
The following shows the message format of the request data and response data of the command.
■Request data
Command Subcommand
■Response data
There is no response data for this command.
Data specified by request data
■Command
ASCII code
1 8 2 6
31 38 32 36
H H H H
■Sub command
Item
For MELSEC-Q/L series
For MELSEC iQ-R series
■Fixed value
Specify '0'.
ASCII code
0 0 0 0
30 30 30 30
H H H H
■Drive No.
Specify the access target drive. (Page 198 Drive No.)
■Date to change, time to change
The file of the last edit date and time is modified with the specified date and time. (Page 206 Creation date and time (last
edit date and time))
■Number of file name characters, file name
Specify the file name to modify attribute. (Page 202 File name specification)
Fixed Date to Time to
Drive No.
values change change
Binary code
26 18
H H
ASCII code
0 0 0 0
30 30 30 30
H H H H
0 0 4 0
30 30 34 30
H H H H
Binary code
00 00 00 00
H H H H
Number of file
File name
name characters
Binary code
00 00
H H
40 00
H H
12 FILE CONTROL
233
12.6 File Modification
12