Delete Registered Data (Command: 1610) - Mitsubishi Electric MELSEC IQ-R series Reference Manual

Delete registered data (command: 1610)

Delete the registered user frame.
Message format
The following shows the message format of the request data and response data of the command.
■Request data
Command Subcommand
■Response data
There is no response data for this command.
Data specified by request data
■Command
ASCII code
1 6 1 0
31 36 31 30
H H H H
*1 For C24, an additional code is added. (Page 35 Additional code (10H))
■Subcommand
ASCII code
0 0 0 1
30 30 30 31
H H H H
■Frame No.
Specify the number of user frame to be deleted. (Page 247 Frame No.)
Type Setting value
User frame 3E8H to 4AFH
8001H to 801FH
When the frame No. whose user frame is not registered is specified, an error occurs and an abnormal
response is returned.
■Number of registration data byte, number of frame byte
Specify '0'.
ASCII code
0 0 0 0
30 30 30 30
H H H H
Number of
Frame No. registration
data byte
*1
Binary code
DLE
10 10 16
H H H
Binary code
01 00
H H
Registration destination
Flash ROM of C24
Buffer memory of C24 (addresses 1B00H to 1FF6H)
Binary code
00 00
H H
13 SERIAL COMMUNICATION MODULE DEDICATED COMMANDS
Number of
frame byte
13
253
13.1 User Frame