Batch write (command: 1601)
Write data to the buffer memory of an intelligent function module.
Do not write any data in "System area" or "Write-protect area" in the buffer memory.
Writing data to the "System area" or "Write-protect area" may cause malfunction of the programmable
controller system.
Message format
The following shows the message format of the request data and response data of the command.
■Request data
Command
Subcommand
■Response data
There is no response data for this command.
Data specified by request data
■Command
ASCII code
1
6
0
1
31
36
30
31
H
H
H
H
■Subcommand
ASCII code
0
0
0
0
30
30
30
30
H
H
H
H
■Start address
Specify the buffer memory start address to be written. (Page 160 Start address)
■Number of bytes
Specify the number of bytes of the buffer memory to be written. (Page 161 Number of bytes)
Specification range: 2H to 780H (1920)
■Module number
Specify the intelligent function module to be written. (Page 161 Module number)
■Write data
Specify the data to be written in the buffer memory. (Page 162 Read data, write data)
Specify the access range within the range of buffer memory.
Number of
Start address
Module No.
bytes
Binary code
01
16
H
H
Binary code
00
00
H
H
Write data
10 BUFFER MEMORY ACCESS
10.2 Intelligent Function Module
10
165