Duplicating Scenes - Native Instruments Maschine Jam Manual

▪ Step Grid: The resolution of the Steps in the Pattern.
▪ Nudge Grid: In addition to the Step Grid, a secondary grid specifically controls the timings
at which existing events/notes can be nudged in the Pattern.
▪ Arrange Grid: The increments used to determine the Pattern Length.
▪ Perform Grid: The quantization that is used to switch between Scenes.
To change the settings of a Grid:
1. Press the GRID button.
2. Turn the Encoder to select a Grid setting.
3. Press the Encoder.
4. Turn the Encoder to select a new value.
5. Press the Encoder to confirm your selection.
A new Grid value is selected.
→
7.5

Duplicating Scenes

You can copy and paste Scenes in your Project using MASCHINE JAM.
Arranging your Project
Duplicating Scenes
MASCHINE JAM - Manual - 118