Native Instruments Maschine Jam Manual page 140

Try automating plug-in parameter values by holding the
finger on a Smart Strip. For more information, see
Switching between Plug-ins
If there are several plug-ins loaded in the plug-in list, you can use the controller to switch be-
tween plug-ins.
To switch between plug-ins:
1. Press and hold the
2. Press the down or up button of the D-pad to step through the loaded plug-in in the plug-in
list.
The LED meters on the Smart Strips update to display the parameters of the selected
→
plug-in, and the Smart Strip can be used to adjust the parameters of the newly selected
plug-in.
Resetting Plug-in Parameters Values
To reset a plug-in parameter to its default value:
1. Press and hold the
2. To reset a plug-in parameter on the Master channel press the
channel press the Group button (A-H), and for the Sound channel press a Sound button
(1-16).
3. Double tap on the Smart Strip of a parameter to reset it.
The plug-in parameter is reset.
→
Selecting a Free Slot to Load a Plug-in
To load another plug-in, such as an effect into a free plug-in slot:
1. Press and hold the
2. Press the down or up button of the D-pad to select the
3. Press the BROWSE
CONTROL button.
CONTROL button.
CONTROL button.
button to load a plug-in.
AUTO button and sliding your
↑8.5, Using Automation
MST
+ symbol.
MASCHINE JAM - Manual - 140
Mixing your Project
Controlling Plug-in Parameters
button, for a Group