Native Instruments Maschine Jam Manual page 95

Element
MAIN
Type
RHYTHM
Rate
Unit
Sequence
Description
Sets the sequential order of the arpeggiated notes. You can choose
from following settings:
Up starts from the root note and plays the notes up through the
chord.
Down plays the notes the other way around.
Up & Down plays the notes in both directions alternatively.
Order Played plays the notes in the order you pressed down the
corresponding pads on your controller. If you have configured chords,
the arpeggio will first play all notes of the chord triggered by the first
button you pressed, then all notes of the chord triggered by the
second button you pressed, etc.
Chord plays all notes of the chord together repeatedly.
Rate sets the beat (musical division) of the Arp engine in relation to
global tempo in musical values, ranging from 1/1 to 1/128. All note
values (except 1/1 and 1/128) are available as basic notes, dotted
notes, and triplets. Dotted notes are 1.5 times longer than the
corresponding basic notes. Triplets are 2/3 the duration of their
corresponding basic notes, so that e.g. three 1/4 notes are equal in
duration to two basic 1/4 notes.
Selects from three variations of the original note length defined by
the RATE parameter: NORMAL
setting), TRIPLET plays triplets of the original note length (faster,
three notes in the duration of two original notes), and
dotted versions of the original note length (slower, two notes in the
duration of three original notes.
Allows you to add interesting rhythms to your arpeggiated notes.
Select one of eight different sequences and apply it to the arpeggio
you are playing. Select
plays the original note length (default
Off to use the default regular sequence.
Recording and Editing Patterns
Creating Melodies and Harmonies
DOTTED plays
MASCHINE JAM - Manual - 95