4.
Press the click-pads in the 8x8 matrix to select the amount of bars you want. One click-
pad equals one bar.
5.
Press the
SONG
button to exit Pattern Length Mode.
The pattern length is adjusted, but can be readjusted at any time by repeating this proce-
→
dure.
6.1.4
Setting the Record Mode
The Record Mode options allow you to adjust Metronome parameters (Level, Time signature
and Auto-on), Count-In Length, and automatic Quantize Mode via the on-screen overlay.
On your controller do the following to access the Record Mode options:
Recording and Editing Patterns
Setting Recording Options
MASCHINE JAM - Manual - 69