Native Instruments Maschine Jam Manual page 94

The 8x8 click-pad matrix will update to display the available notes.
→
Setting the Arpeggiator
1. To edit the Arp parameters in the on-screen overlay, touch the Encoder.
⇨
The on-screen overlay will appear and you can edit the options.
2. Turn the Encoder to select a parameter and press it to confirm a selection.
3. Turn the Encoder to adjust a parameter value and press it again to confirm your changes.
Page 1 of the Arpeggiator on-screen overlay
Page 2 of the Arpeggiator on-screen overlay
▪ To create interesting rhythms for the Arp sequence, use the
quence, and Swing. For more information, see section Rhythm.
▪ To change the range of available notes for the Arp sequence, as well as their velocity and
length, use the OTHER
the parameter description in the table below.
▪ To latch the playback of the Arp sequence, use the
see section Hold.
The following table describes each of the parameters in the Arpeggiator on-screen overlay.
parameters Octaves, Dynamic, and Gate. For more information, see
RHYTHM parameters Rate, Se-
HOLD parameter. For more information,
MASCHINE JAM - Manual - 94
Recording and Editing Patterns
Creating Melodies and Harmonies