8.1.6.2
Tuning a Group
Tune Mode allows you to tune a whole Group. Simply select a Group, and then slide your finger
across a Smart Strip to adjust the tuning. The LEDs indicate the tune tuning.
To adjust the tune of a Group:
1.
Press and hold the
2.
Press the Group button (A-H) to select the Group that containing the Sound you want to
adjust. If necessary, use the left and right arrows of the D-pad to access each bank of
eight Groups.
3.
Slide your finger across a Smart Strip to adjust the tuning of a Group. Hold
just the value in finer increments.
The tuning of the selected Group is adjusted.
→
Resetting the Tuning of Group
To quickly reset the tuning of a Group:
1.
Hold the
TUNE
button.
⇨
The Group buttons and Sound click-pads will become illuminated. The selected Group
button will blink and the on-screen overlay will appear.
⇨
The Smart Strips now represent Groups A-H.
2.
Double tap on the Smart Strip of the Group you want to reset.
The Group tuning will reset. You can reset other Groups by switching between banks using
→
the left and right buttons of the D-pad and double-tapping on each of the Smart Strips.
TUNE
button.
Mixing your Project
Basic Functions
SHIFT
to ad-
MASCHINE JAM - Manual - 135