Native Instruments Maschine Jam Manual page 79

3. Press SHIFT + SELECT
⇨
New steps will now be audibly more pronounced and the click-pads will be brighter to vis-
ually signify the step is accented. The controller will remain in Accent Mode until you
press SHIFT + SELECT
4. Press PLAY to start the sequencer.
Now you will hear the sequence and see a light chasing through the matrix from left to
→
right. You may continue to activate or deactivate click-pads to build your sequence during
playback.
Accessing the Pattern
If your Pattern is larger than the 8x8 click-pad matrix you will want to access the other parts:
1. Press the numbered buttons (1-8) across the top of the Project view to access the various
parts of your pattern.
⇨
The Project view will update to show each part of the pattern.
2. Press SHIFT + Group button
⇨
The Project view will automatically update to show each part of the pattern during play-
back.
3. To switch to another Sound, press
sequence.
Progressively, you build up a new Pattern.
→
At any time, you can leave Step Mode:
Press the STEP button to exit Step Mode.
►
(ACCENT) to add an accent to the step.
(ACCENT) again.
A to allow the controller to automatically follow the pattern.
SELECT and the click-pad with the Sound you want to
Recording and Editing Patterns
Playing and Programming Beats
MASCHINE JAM - Manual - 79