Table of Contents
Advertisement
MASCHINE JAM Overview
MASCHINE JAM Top View
Use the
SHIFT
button to access the FX Select function. Press
SHIFT
+
PERFORM
and turn the
Encoder to select a Performance effect for a Group (A-H). The available effects are: Filter,
Flanger, Burst Echo, Reso Echo, Ring, Stutter, Tremolo, and Scratcher.
(3) NOTES: In Notes Mode each of the eight strips can be used to play a chord. This allows for
perfect progressions in the selected scale, and interesting musical gestures.
(4) LOCK: Press Allows you to create up to sixty-four snapshots, with each snapshot containing
every modulatable, parameter in your project, including your Solo and Mute assignments. You
can switch between these instantly, or morph between them synchronized to the tempo. This is
a nice tool for extensive modulations, but also very useful to compare mixes, or to switch up
snapshots during a live performance.
(5) TUNE: Press
TUNE
to adjust the tune of a particular Group or Sound. To adjust the tuning
of a Group, press the Group button (A–H) until it flashes, then turn the Encoder or slide your
finger on the corresponding Smart Strip. To adjust the tune of an individual Sound, press the
Group button (A–H) until it flashes, then press the Pad
1-16
to select the Sound you want to
change, then turn the Encoder or slide your finger on the corresponding Smart Strip to adjust
the tuning amount.
(6) SWING: Press
SWING
to adjust the amount of Swing. Swing shifts some of the played notes
or events, adding some "groove" to your Pattern to the whole project, a Group or individual
Sounds. Use the Smart Strips or on-screen overlay to adjust Swing values.
(7) AUTO: Press
AUTO
to record pattern modulation. Writing modulation means MASCHINE
can record any changes you make to a selected parameter(s) and then play back those changes
each time with the track. Modulation of almost any parameter on the Sound and Group chan-
nel is achieved with one-touch simplicity. Press and hold the
AUTO
button while sliding your
finger across the Smart Strips to record modulation for the corresponding parameter(s) when
playback is active.
(8) CONTROL: Press
CONTROL
to access all Sound, Group and Master parameters via the eight
Smart Strips.
(9) AUX: Press
AUX
to access AUX1 for Groups and Sounds. Press
SHIFT
+
AUX
to access
AUX2.
(10) LEVEL: Press
LEVEL
to access Group and Sound volume levels. Press
SHIFT
+
LEVEL
to
access Group and Sound Pan settings.
MASCHINE JAM - Manual - 35
Hide quick links:
Advertisement
Table of Contents
