Using Mute - Native Instruments Maschine Jam Manual

When Solo is activated the Group button is highlighted and the sound is isolated in the
→
mix. All the other Groups are dimmed and can no longer be heard.
Activating Solo on a Sound
1. Press the Group button (A-H) containing the Sound you want to solo.
2. Press and hold SOLO
3. Press the Sound (1-16) you want to solo. Press the Sound again to turn Solo off.
When Solo is on, the click-pad is highlighted and its audio is isolated. All the other click-
→
pads are dimmed and no other Sounds from the Group can be heard.
Pinning allows a mode to remain selected without the need to hold the mode button, for
example, press SOLO
ulate the controls of MASCHINE JAM. Click
8.1.4

Using Mute

Mute Mode allows you to silence any number of Sounds or Groups. Mute can be used to great
effect when you quickly want to remove Sounds or Groups from the mix and then bring them
back. This can be very effective when checking a mix or as an effect during a live performance.
to momentarily enter Solo Mode.
+ SONG to pin Solo Mode. You can now use both hands to manip-
SOLO again to exit the pinned Solo Mode.
MASCHINE JAM - Manual - 129
Mixing your Project
Basic Functions