4.
Press the
LOCK
button to update your snapshot.
An updated snapshot of parameters is created. You can continue to update the snapshot
→
by pressing the
LOCK
Recalling a Snapshot in Lock View
To recall a Lock snapshot:
1.
Press the
SHIFT
+
2.
Press the
LOCK
button.
3.
Press the illuminated button on the 8x8 matrix containing the snapshot you want to re-
call.
The snapshot is recalled and parameters return to their stored setting. You can also morph
→
between settings using the settings in the on-screen overlay.
Morphing Between Snapshots
When recalling snapshots it possible to morph between them to add movement and interest to
song. Use the on-screen overly to set your Morphing preferences.
To morph between snapshots:
1.
Touch the Encoder to open the Lock onscreen-overlay.
⇨
The on-screen overlay will open.
2.
Turn the morph setting on, and adjust the transition time accordingly.
As you switch between your snapshots you will be able to hear a controlled transition from
→
one to another at the time selected time rate.
The Lock on-screen overlay:
button.
LOCK
button to enter Lock View.
Mixing your Project
Creating Parameter Snapshots using Lock
MASCHINE JAM - Manual - 146