3.
Press the click-pad (1-16) containing the Sound you want to reset.
⇨
The Smart Strips will now represent Sounds
selected.
4.
Double tap on the Smart Strip of the Sound you want to reset.
The Sound will reset to the default level.
→
8.1.1.2
Setting a Group Level
Level Mode turns each Smart Strip into a volume 'fader' for up to eight Groups at a time. Sim-
ply slide your finger across a Smart Strip to adjust a Group volume, and the LEDs indicate the
volume level. Use the D-pad to access each bank of Groups.
Adjusting the Volume of a Group in Level Mode
To adjust the volume of a Group in Level Mode:
1.
Press and hold the
⇨
The Smart Strips act like faders and the LED's indicate the level of each Group. If neces-
sary, use the left and right arrows of the D-pad to access other Group banks.
2.
Press the Group button (A-H) to select the Group you want to adjust.
3.
Slide your finger across a Smart Strip to adjust the level of a Group.
The volume level of the selected Group is adjusted.
→
Adjusting the Volume of a Group using the Input/Metering Section
Alternatively, you can still adjust the level of a group without entering Level Mode, meaning
you can continue to perform a task in another mode and still adjust the volume of a group. To
achieve this, use the Input/Metering section on the right to adjust the volume level of a Group.
LEVEL
button.
1-8
or
9-16
depending on which Sound you
Mixing your Project
Basic Functions
MASCHINE JAM - Manual - 123