Maschine Jam Rear View - Native Instruments Maschine Jam Manual

1
2 3
Overview of the Transport section.
(1) PLAY: Press the PLAY
back. Press the SHIFT
the current loop range.
(2) REC: When playback is on, press
SHIFT + REC to begin recording with a Count-in. Press
(3) Page Left: Use the left page button to navigate to the left through the pages of a plug-in
Control Mode, or to switch between Sounds
Page button (METRO) to activate the metronome.
(4) Page Right: Use the right page button to navigate to the right through the pages of a plug-in
Control Mode, or to switch between Sounds
Page button (LOOP) to activate the Loop.
(5) TEMPO: Press TEMPO
per minute (BPM).
(6) GRID: Press GRID to enter Grid Mode. Grid mode allows you to select resolutions for the
STEP grid (used for quantization), Nudge, Arrange, and Perform grid settings. Use the on-
screen overlay to adjust settings. Press
adjust Metronome parameters (Level, Time signature and Auto-on) Count-In Length, automatic
Quantize Mode, and set the Pattern Follow via the on-screen overlay.
3.2

MASCHINE JAM Rear View

Here is a description of the MASCHINE JAM rear view.
4 5 6
button to activate playback. Press
+ PLAY to restart playback at any time to restart from the beginning of
REC to begin recording. Or when playback is off, press
1-8
1-8
to and turn the Encoder to change the tempo of the track in beats
SHIFT
PLAY a second time to stop play-
REC a second time to stop recording.
or 9-16 in Level Mode. Press
or 9-16 in Level Mode. Press
+ GRID to access REC
MASCHINE JAM Overview
MASCHINE JAM Rear View
SHIFT + left
SHIFT + right
MODE. This allows you
MASCHINE JAM - Manual - 37