Undoing And Redoing Actions; Using Maschine Jam In Plug-In Mode - Native Instruments Maschine Jam Manual

Once a mode has been pinned your controller will automatically pin the mode next time
it is pressed.
You can unpin any mode by pressing its button together with
4.4

Undoing and Redoing Actions

Undoing and re-doing your last actions can be useful to cancel operations you have performed
or to compare two versions before and after a change. You can undo most of the actions you
performed after loading or creating your Project.
Step Undo/Redo is the classic undo/redo. It cancels or re-executes each single action you have
performed.
On your controller, perform the Step Undo operation by pressing
►
form the Step Redo operation, press
4.5

Using MASCHINE JAM in Plug-in Mode

You can run the MASCHINE software as a stand-alone application or integrate it into your fa-
vorite Digital Audio Workstation (or DAW, in short) by loading it as a plug-in. The MASCHINE
software is available in the VST, Audio Unit, and AAX plug-in formats. For further information
on plug-in compatibility and for a detailed description of how to use plug-ins in your host,
please refer to the documentation included with your host software. If you did not install the
plug-ins when installing the MASCHINE software, please refer to the Setup Guide available
from the documentation folder in the MASCHINE software installation folder.
SONG
SHIFT + REDO.
Working with MASCHINE JAM
Undoing and Redoing Actions
([PIN]) button again.
SHIFT + UNDO. To per-
MASCHINE JAM - Manual - 43