Native Instruments Maschine Jam Manual page 47

If you have more than one instance of the MASCHINE software running on your comput-
er, you can control each instance with a different controller. See the MASCHINE Soft-
ware Manual for more information.
A controller not connected to any MASCHINE software instance can be used in MIDI
Mode (i.e. as a MIDI controller) at the same time as the other controller(s). See the Con-
troller Editor Manual for more information on MIDI Mode.
On the controller you want to use with the MASCHINE software, do the following:
▪ MASCHINE JAM controller: Press
an instance, and press the Encoder to load it.
▪ MASCHINE STUDIO controller: Press
desired instance, and press the jog wheel or Button 8 to load it.
▪ MASCHINE (MK2) controller: Press
select the desired instance, and press Button 8 to load it.
▪ MASCHINE MIKRO (MK2) controller: Press
sired instance, and press the Encoder to load it.
SHIFT + H (INSTANCE) and turn the Encoder to select
+
SHIFT + PLUG-IN, turn the jog wheel to select the
SHIFT + STEP, turn Knob 5 (or press Button 5/6) to
SHIFT
Using MASCHINE JAM in Plug-in Mode
+ F2, turn the Encoder to select the de-
MASCHINE JAM - Manual - 47
Working with MASCHINE JAM