Adjusting the Volume of the Cue:
1.
Press the
Cue
button in the Input/Metering section on the right.
2.
Turn the Encoder to adjust the level of the Cue volume.
3.
Hold
SHIFT
and turn the Encoder to adjust the value in finer increments.
For detailed information on setting the Cue Bus read the MASCHINE Software Manual availa-
ble from the
Help
menu.
8.1.1.5
Mixing External Signals
MASCHINE allows you to route not only other internal signals to your Sounds, but also audio
coming from the external sources.
MASCHINE JAM allows you to select between two external input sources. You can meter an
input level using the Level meter and adjust an input level using the Encoder.
To adjust the level of an external source 1:
1.
Press the
IN1
button to select input source 1.
2.
Turn the encoder to set the volume level.
To adjust the level of an external source 2:
Mixing your Project
Basic Functions
MASCHINE JAM - Manual - 127