Adjusting Aux Send - Native Instruments Maschine Jam Manual

3. Press the Sounds (1-16) to mute them. Press the Sound click-pads again to turn mute
off.
Selected Sounds are removed or returned to the mix.
→
Pinning allows a mode to remain selected without the need to hold the mode button, for
example, press MUTE
nipulate the controls of MASCHINE JAM. Click
Mode.
8.1.5

Adjusting AUX Send

Each Sound or Group of your Project provides two auxiliary outputs that you can route to addi-
tional targets. For example, you can send a definable amount of the channel's audio output to
other channels for further processing. This is notably used in send effects. The auxiliary out-
puts of a Sound/Group are configured on the Aux page of the Output properties.
MASCHINE JAM allows you to control the Aux levels for each Group and Sound.
Adjusting the Aux Level of a Group
To adjust the Aux level of a Group:
1. Press and hold the
⇨
The Smart Strips act like faders and the LED's indicate the level of each Group. If neces-
sary, use the left and right arrows of the D-pad to access other Group banks.
+ SONG to pin Mute Mode. You can now use both hands to ma-
AUX button.
MUTE again to exit the pinned Mute
MASCHINE JAM - Manual - 131
Mixing your Project
Basic Functions