Controlling Sampling From The Hardware; Recording A Sample (Hardware) - Native Instruments Maschine Reference Manual

11.1 Controlling Sampling from the Hardware

11.1.1 Recording a Sample (Hardware)

Choose an empty Sound Slot to record into by selecting it with its Pad.
Now hit SAMPLING to enter Sampling Mode:
The Record Page on the hardware Displays
S
oUrCE
I
npUt
m
odE
d
EtECt
You can select the Source by using Knob 1: it can be ei-
ther set to Extern for audio signals connected to your audio
interface, or Intern for audio signals from MASCHINE itself
(either from another Group or from the Master Output).
Using Knob 2 you can choose between the available
Inputs. If Extern is selected, you can choose the external
input of MASCHINE: In 1 L, In 1 R, or In 1 L + R. If Intern
is selected you can select from the available Groups and
the Master as a source.
MASCHINE offers two different modes for starting the re-
cording available via Knob 3.
If d is selected, you can set a certain t
EtECt
using Knob 4, and after pressing Start the input signal lev-
el exceeding this Threshold will start the recording. This is
useful to record a singer or an instrumentalist for example.
value
hrEShold
MASCHINE 1.5 Reference Manual – 186