Drum Unit; Replacing The Drum Unit - Canon imageRUNNER 2320 Reference Manual

Hide thumbs Also See for imageRUNNER 2320:
Table of Contents

Advertisement

Drum Unit

When the drum unit is full of waste toner, the message <Waste toner full/Replace
the drum> appears on the LCD display.
Waste toner full
Replace the drum
You cannot continue printing after the message appeared. Follow the procedure
below to replace the drum unit.
WARNING
6
Do not throw used drum units into open flames, as this may ignite the toner
remaining inside the unit, and result in burns or a fire.
IMPORTANT
If you use the machine without inserting the drum unit, the message <Drum is not set/
Insert the drum> appears on the LCD display. In this case, turn OFF the main power, and
install the drum unit into the machine.

Replacing the Drum Unit

1
6-16

Drum Unit

Done
Press the button on the left cover
of the main unit, and open the left
cover.

Advertisement

Table of Contents
loading

Table of Contents