Canon imageRUNNER 2320 Reference Manual page 108

3
Register Paper Type
The number of available paper sources may vary depending on the machine
configurations.
Available paper types for the selected drawer are displayed.
4
3
Drawer 1
Repeat steps 3 and 4 to set the paper type for the other drawers.
The selected mode is set.
NOTE
•
If a paper type other than <Plain> is selected, the icon of the selected paper source is
marked with an asterisk (
•
For more information on paper types, see "Available Paper Stock," on p. 8-17.
5
Press
3-14
Specifying Common Settings
Drawer 1
Drawer 2
Drawer 3
Drawer 4
Plain
Recycled
Color
Bond
*
(Reset) to return to the Standby display.
Use [
desired paper source from
<Drawer 1>, <Drawer 2>,
<Drawer 3>, and <Drawer 4> ➞
press [OK].
Use [
<Recycled>, <Color>, <Bond>, or
<Heavy Paper 1> ➞ press [OK].
Make sure that the registered paper type
setting is the same paper type that is loaded
in the paper drawer.
).
] or [ ] to select the
] or [ ] to select <Plain>,