Default Display After Auto Clear - Canon imageRUNNER 2320 Reference Manual

3
Invert Screen Colors
4
Press

Default Display after Auto Clear

3
You can set whether the screen specified as the Initial Function is displayed after
the Auto Clear mode initiates.
NOTE
•
The time necessary for the Auto Clear mode to initiate can be set. (See "Auto Clear
Time," on p. 3-31.)
•
The default setting is 'Initial Function'.
1
Press
<Common Settings> ➞ press [OK].
For help, see the screen shots in step 2 of "Initial Function at Power ON," on p. 3-5.
The Common Settings menu appears.
2
Common Settings
3-8
Specifying Common Settings
Off
On
(Reset) to return to the Standby display.
(Additional Functions) ➞ use [
Initial Function
Contrast
Invert Screen Colors
Auto Clear Setting
Use [ ] or [ ] to select <Off> or
<On> ➞ press [OK].
The selected mode is set.
] or [ ] to select
Use [ ] or [ ] to select <Auto
Clear Setting> ➞ press [OK].
The Auto Clear Setting menu appears.