Offset Roller Cleaning - Canon imageRUNNER 2320 Reference Manual

Offset Roller Cleaning

When the offset rollers become dirty, the accuracy of paper alignment deteriorates.
Perform offset roller cleaning once a month to maintain the accuracy.
WARNING
When cleaning the machine, first turn OFF the main power switch and
disconnect the power cord. Failure to observe these steps may result in a fire or
electrical shock.
NOTE
If either the optional Inner 2 Way Tray-E2 or Additional Finisher Tray-C1 is attached, it is
recommended that you clean the roller after printing to the top tray.
1
Lift the rollers slightly, and use a damp cloth to wipe the surface
of the rollers while rotating them.
6
2
Wait approximately three minutes for the rollers to dry before
performing operations, or wipe the roller surface dry with a soft
cloth.
6-36
Routine Cleaning
Offset Rollers