8
Click [Scan].
Scanning starts.
When scanning is complete, the Color Network ScanGear Main Window closes, and
the scanned image is transferred to the application.
IMPORTANT
•
After clicking [Scan], do not perform any operation in the Color Network ScanGear Main
Window until the dialog box showing the scanning progress appears.
•
If Color Network ScanGear does not automatically close after scanning, click [ ](Exit) to
2
close it.
•
Be sure to close the Color Network ScanGear Main Window before exiting the
application.
9
When scanning is complete, remove your originals.
10
If Department ID Management or User ID Management is set, press
NOTE
•
For instructions on using Department ID Management, see "Department ID
Management," on p. 4-8.
•
For instructions on using User ID Management, see Chapter 3, "Customizing Settings,"
in the Remote UI Guide.
2-36
Basic Remote Scanning
(ID).