Canon imageRUNNER 2320 Reference Manual page 184

•
If an original is placed on the platen glass:
•
If originals are placed in the optional feeder:
5
IMPORTANT
•
If the Staple mode is set, the output tray moves downward as the stack of paper that is
output increases in quantity and thickness. Once the output tray has reached its stacking
limit, printing and stapling stop temporarily. Remove all of the stapled prints from the
output trays, and printing and stapling resume.
•
Only the following paper sizes can be stapled: A4, A4R, and A3.
•
You cannot staple envelopes, transparencies, or labels.
•
Do not pull copies or prints out of the output area while they are being stapled. Remove
the copies or prints after they are output to the output trays.
NOTE
•
The maximum number of sheets, including cover sheets, that can be stapled together is
as follows (only 64 g/m
128 g/m
- A4
- A4R and A3
5-8
Finisher-U2
Copies are stapled here.
Copies are stapled here.
2
to 80 g/m
2
paper can be used for the cover page):
2
50 sheets (64 g/m to 80 g/m
2
30 sheets (64 g/m to 128 g/m
Copies are stapled here.
Copies are stapled here.
2
paper can be used for the main document, and 64 to
2
)
2
)
R