Entering a User ID and Password
If User ID Management in System Settings (from the Additional Functions menu) is
set to 'On', and User IDs and passwords are registered in the machine, you must
enter a User ID and password before using the machine.
2
IMPORTANT
•
The User ID Management function is available only when the optional Network Kit is
attached to the machine.
•
To log in to the machine, User IDs and passwords must be registered in the machine
from the Remote UI beforehand. For instructions on registering a User ID and password,
see the Remote UI Guide.
1
Enter User ID/Pass
ID Key after Input
When done press ID key
2
User ID
● If a password has been set for the User ID:
❑
● If no password has been set for the User ID:
❑
2-12
Entering a User ID and Password
User ID:
Password:
User01_
Set
Entry Mode: 12
proceed to step 3.
proceed to step 5.
Use [
] or [
] to select <User
ID:> ➞ press [OK].
Enter your User ID using
(numeric keys) ➞ use [
to select <Set> ➞ press [OK].
NOTE
For instructions on entering characters,
see "Entering Characters," on p. 2-6.
-
] or [
]