Canon imageRUNNER 2320 Reference Manual page 59

1
Device Name
_
Set
Entry Mode: A
● If
(Tone) is pressed:
❑
Proceed to step 3.
● If <Entry Mode:> is selected:
❑
Proceed to step 2.
2
Entry Mode
A
a
1
To select the desired entry mode
('A' in this case), press
or use [ ] or [ ] to select <Entry
Mode:> ➞ press [OK].
The entry mode changes every time you
press (Tone) in either of the following
orders:
- 'A' ➞ 'a' ➞ '1'
- 'Aa' ➞ '12'
Use [ ] or [ ] to select the
desired entry mode from 'A', 'a',
and '1' ➞ press [OK].
The selected mode is set.
Entering Characters
(Tone),
2
2-7