Adjusting Output Speed In The Rotate + Collate Mode - Canon imageRUNNER 2320 Reference Manual

Adjusting Output Speed in the Rotate + Collate
Mode
Printing with the Rotate + Collate mode involves two different paper sources, and a
certain wait time is required to switch them. You can make this wait time shorter or
longer by selecting whether to give priority to the speed or image quality.
NOTE
•
This mode is available only if the optional Finisher-U2 is not attached to the machine.
•
The default setting is 'Speed Priority 1'.
3
1
Press
<Adjustment/Cleaning> ➞ press [OK].
For help, see the screen shots in step 2 of "Setting the Fixing Mode for Bond Paper," on
p. 3-33.
The Adjustment/Cleaning menu appears.
2
Adjustment/Cleaning
3
Rotate Collate Adj.
Details of each item are as follows:
<Speed Priority 1>
The wait time is shortest, but the image quality is lowest.
<Speed Priority 2>
The wait time and image quality are both moderate.
<Image Priority>
The wait time is longest, but the image quality is highest.
The selected mode is set.
3-40
Adjusting the Machine
(Additional Functions) ➞ use [
Special Mode O
Special Mode P
Special Mode S
Rotate Collate Adj.
Speed Priority 1
Speed Priority 2
Image Priority
] or [ ] to select
Use [ ] or [ ] to select <Rotate
Collate Adj.> ➞ press [OK].
The Rotate Collate Adj. menu appears.
Use [ ] or [ ] to select <Speed
Priority 1>, <Speed Priority 2>, or
<Image Priority> ➞ press [OK].