Setting The Speed Or Print Side Priority - Canon imageRUNNER 2320 Reference Manual

Setting the Speed or Print Side Priority

You can set whether the printing speed is the priority for your job, or whether to
print on a specific side of the paper. This setting is useful when you want to make
one- or two-sided prints on preprinted paper (paper which has logos or patterns
already printed on it) without changing the orientation of the paper loaded in a
paper source.
NOTE
The default setting for all paper sources is 'Speed Priority'.
3
1
Press
<Common Settings> ➞ press [OK].
For help, see the screen shots in step 2 of "Initial Function at Power ON," on p. 3-5.
The Common Settings menu appears.
2
Common Settings
3
Paper Feed Switch
3-20
Specifying Common Settings
(Additional Functions) ➞ use [
Register Paper Type
Tray Designation
Stand. Stack Bypass
Paper Feed Switch
Stack Bypass
Drawer 1
Drawer 2
Drawer 3
] or [ ] to select
Use [ ] or [ ] to select <Paper
Feed Switch> ➞ press [OK].
The Paper Feed Switch menu appears.
Use [ ] or [ ] to select <Stack
Bypass> or the desired paper
drawer ➞ press [OK].
<Drawer 2> appears only if the optional
Cassette Feeding Module-J1 or -K1 is
attached.
<Drawer 3> (as well as <Drawer 4>) appears
only if the optional Cassette Feeding
Module-K1 is attached.