Tone Settings
You can set whether or not to sound audible tones. The settings for the following
tones are available:
•
Entry Tone:
•
Error Tone:
•
Scan Done Tone:
•
Print Done Tone:
NOTE
The default setting is 'On' for the Entry Tone and Error Tone, and 'For Error Only' for the
Scan Done Tone and Print Done Tone.
1
Press
The Additional Functions menu appears.
2
Additional Functions
Audible Tones
Common Settings
Copy Settings
Printer Settings
3
Audible Tones
Entry Tone
Error Tone
Scan Done Tone
Print Done Tone
sounds when a key is pressed on the control
panel.
sounds when a malfunction occurs (e.g., a
paper jam or operational error).
sounds when scanning is complete.
sounds when printing is complete.
(Additional Functions).
Use [
] or [
] to select <Audible
Tones> ➞ press [OK].
The Audible Tones menu appears.
Use [
] or [
] to select <Entry
Tone>, <Error Tone>, <Scan Done
Tone>, or <Print Done Tone> ➞
press [OK].
Tone Settings
3
3-3