Finisher-U2 - Canon imageRUNNER 2320 Reference Manual

Finisher-U2

The Finisher-U2 is equipped with the following finishing modes: Staple, Offset +
Group, and Offset + Collate. (See "Finishing Modes," on p. 5-7.)
If the optional Additional Finisher Tray-C1 is attached to the Finisher-U2, prints can
be delivered to two different locations.
IMPORTANT
The Finisher-U2 cannot be installed with the optional Inner 2 Way Tray-E2.
5
a Front Cover of the Finisher-U2
Open this cover to replace the staple cartridge in
the stapler unit, or to clear a staple jam. For
instructions on replacing the staple cartridge, see
"Replacing the Staple Cartridge," on p. 6-21. For
instructions on clearing a staple jam, see
"Clearing Staple Jams," on p. 7-28.
b Output Tray
Prints are output to this tray.
5-6

Finisher-U2

c Additional Finisher Tray-C1
The Additional Finisher Tray-C1 can be attached
to the optional Finisher-U2 to provide an
additional paper output tray.
d Auxiliary Tray
If you are printing on large size paper, such as A3
or B4, pull out the auxiliary tray.