Displaying A Feeder Error Message Prompt - Canon imageRUNNER 2320 Reference Manual

Displaying a Feeder Error Message Prompt

If the feeder is not clean, the machine may scan and print dust and grime on the
output. You can use this mode to prompt you to clean the scanning area when the
machine detects streaks or stains.
NOTE
•
This mode is available only if the optional Feeder (DADF-P2) is attached to the machine.
•
The default setting is 'On'.
1
Press
<Common Settings> ➞ press [OK].
For help, see the screen shots in step 2 of "Initial Function at Power ON," on p. 3-5.
The Common Settings menu appears.
2
Common Settings
Stand. Stack Bypass
Paper Feed Switch
Language Switch
Dirty Feeder Error
3
Dirty Feeder Error
Off
On
4
Press
(Additional Functions) ➞ use [
(Reset) to return to the Standby display.
] or [ ] to select
Use [ ] or [ ] to select <Dirty
Feeder Error> ➞ press [OK].
The Dirty Feeder Error menu appears.
Use [ ] or [ ] to select <Off> or
<On> ➞ press [OK].
If you select <On>, the screen prompting you
to clean the scanning area appears when the
machine detects streaks or stains.
The selected mode is set.
Specifying Common Settings
3
3-23