Switching Between Inch And Millimeter - Canon imageRUNNER 2320 Reference Manual

Switching between Inch and Millimeter

You can select either inch or millimeter for the unit of measurement.
NOTE
The default setting is 'mm'.
1
Press
<Common Settings> ➞ press [OK].
For help, see the screen shots in step 2 of "Initial Function at Power ON," on p. 3-5.
The Common Settings menu appears.
2
Common Settings
Dirty Feeder Error
Remote Scan Compress
Remote Scan Gamma
Inch/Millimeter
3
Inch/Millimeter Switch
mm
inch
4
Press
(Additional Functions) ➞ use [
(Reset) to return to the Standby display.
] or [ ] to select
Use [ ] or [ ] to select <Inch/
Millimeter> ➞ press [OK].
The Inch/Millimeter Switch menu appears.
Use [ ] or [ ] to select <mm> or
<inch> ➞ press [OK].
The selected mode is set.
Specifying Common Settings
3
3-27