Attach the end guide while pressing down the point indicated with 'A'.
Lift up the lock lever on the front slide guide, and slide it
backwards or forwards to align it with the groove marked with the
desired paper size.
Lower the lock lever to lock the
front slide guide into place.
Be sure to set the lock lever correctly. If
the lock lever is positioned incorrectly for
the type of paper loaded in the paper
drawer, the wrong paper type will be
shown on the LCD display. This may also
cause paper jams, dirty prints, or make
the inside of the machine dirty.
Load the appropriate size paper
into the paper drawer.
When loading paper, take care not to
cut your hands on the edges of the