Canon imageRUNNER 2320 Reference Manual page 263

Over page limit/Press OK key
Cause The machine is set to restrict printing, and the set page limit for printing has
been reached.
Remedy From the Dept. ID Management (Department ID Management) menu in the
System Settings menu, open the Limit Settings menu and change the maximum
number of pages that can be printed.
Paper jam
Cause 1 An original jam or paper jam has occurred.
Remedy Remove the jammed paper from the machine. (See "Clearing Paper Jams," on
p. 7-3.)
Cause 2 A cover has been opened during printing.
Remedy Open the cover again and check if there is any jammed paper. Clear the
jammed paper, if any, and close the cover. The message disappears, and
printing resumes.
Platen glass dirty/Clean platen glass
Cause The feeder's scanning area is dirty.
Remedy Clean the feeder's scanning area. (See "Manual Feeder Cleaning," on p. 6-26.)
Restart the machine./If problem persists,/call service rep.
Cause An error has occurred.
Remedy Contact your local authorized Canon dealer. (See "Contacting Your Local
Authorized Canon Dealer," on p. 7-37.)
Set doc. on glass
Cause The original has been placed in the feeder and a mode that cannot be used with
the feeder, such as the 2-Page Separation mode, has been selected.
Remedy Place the original on the platen glass.
Staple jam
Cause A staple jam may have occurred in the Finisher-U2.
Remedy Check if a staple jam has occurred. (See "Clearing Staple Jams," on p. 7-28.)
List of Error Messages
7
7-35