Canon imageRUNNER 2320 Reference Manual page 179

a Inner 2 Way Tray-E2
Attaching the Inner 2 Way Tray-E2 enables you
to have two output trays.
b Cassette Feeding Module-J1
The Cassette Feeding Module-J1 provides an
additional paper source for printing jobs. The
paper drawer holds up to 250 sheets of paper
(80 g/m 2 ).
c Cassette Feeding Module-K1
The Cassette Feeding Module-K1 provides two
additional sources of paper for printing jobs. Each
paper drawer holds up to 250 sheets of paper
2
(80 g/m ).
d Duplex Unit-A1
The Duplex Unit-A1 enables you to use the
2-sided mode for copying or printing.
NOTE
The optional Inner 2 Way Tray-E2 cannot be used with the optional Finisher-U2 and
Additional Finisher Tray-C1.
e Finisher-U2
The Finisher-U2 is equipped with the following
features: Staple, Offset + Group, and Offset +
Collate.
f Feeder (DADF-P2)
Originals placed in the feeder are automatically
fed sheet by sheet to the scanning area. The
feeder also automatically turns over two-sided
originals to make one- or two-sided copies.
g Document Tray-J1
Located on the top right side of the machine, and
can be used for originals waiting to be scanned,
or that have already been scanned. You can also
use the document tray for storing the manuals
required for operating the machine.
h Additional Finisher Tray-C1
The Additional Finisher Tray-C1 can be attached
to the optional Finisher-U2 to provide an
additional paper output tray.
System Configuration
5
5-3