The machine stops scanning if the Scan Limit is reached while the machine is scanning
originals that are being fed from the optional feeder. (Those originals that were scanned
before the limit is reached are not added to the scan count.)
If you make a mistake when entering a number, press
enter the correct number.
You can set the page limit from 1 to 999,999 pages. Once a page limit is reached,
copying, scanning, or printing is not possible.
The page limit refers to the number of printed surfaces. Therefore, a two-sided print is
counted as two pages.
Department ID Management
(Reset) to return to the Standby display.
Use [ ] or [ ] to select <On> ➞ press
If you do not want to set a page limit
restriction for prints, select <Off>.
Enter the maximum number (up to six
digits) of pages that can be printed by the
registered Department ID using
(numeric keys) ➞ press [OK].
The Print Limit is set.
(Clear) to clear the number ➞