Canon imageRUNNER 2320 Reference Manual page 110

2
Common Settings
3
Tray Designation
3
4
Tray A
5
Copy
IMPORTANT
If a certain tray reaches its stacking limit, the machine automatically uses another tray
that is designated for the same function.
6
Press
3-16
Specifying Common Settings
Printer Density
Auto Drawer Select
Register Paper Type
Tray Designation
Tray A
Tray B
Copy
Printer
Other
Off
On
(Reset) to return to the Standby display.
Use [ ] or [ ] to select <Tray
Designation> ➞ press [OK].
The Tray Designation menu appears.
Use [ ] or [ ] to select <Tray A>
or <Tray B> ➞ press [OK].
Use [ ] or [ ] to select the
function for which to designate
output trays A and B ➞ press
[OK].
You can select <Copy>, <Printer>, or
<Other>.
NOTE
<Other> is used for specifying the report
printing settings.
Use [ ] or [ ] to select <Off> or
<On> ➞ press [OK].
If you want to use an output tray exclusively
for a specific function, select <On> only for
that function.
Repeat steps 4 and 5 to set Tray Designation
settings for the other functions.
The selected mode is set.